enable Command¶
Administratively enable an existing connection.
Important
This command is not available once tags have been assigned to the system, as that indicates it is now centrally managed.
Usage¶
enclave enable <VALUE>
[--profile <VALUE>]
[--verbosity|-v <VALUE>]
Parameters¶
| Position | Name | Short Name | Required | Description |
|---|---|---|---|---|
| 0 | Yes | Specify the certificate name of a disabled peer to (re)enable the connection. (Example use; enclave enable R2D2) | ||
| profile | No | Specify the enclave profile name. | ||
| verbosity | v | No | If specified, sets the verbosity of this command, overriding any configured value. Values of 1 to 5 will apply increasing verbosity. |
Parameter (Position 0)¶
Specify the certificate name of a disabled peer to (re)enable the connection. (Example use; enclave enable R2D2)
| Position: | 0 |
| Required: | Yes |
| Default value: | None |
profile Parameter¶
Specify the enclave profile name.
| Name: | profile |
| Position: | Named parameter |
| Required: | No |
| Default value: | None |
verbosity Parameter¶
If specified, sets the verbosity of this command, overriding any configured value. Values of 1 to 5 will apply increasing verbosity.
| Name: | verbosity |
| Short name: | v |
| Position: | Named parameter |
| Required: | No |
| Default value: | -1 |
Documentation generated by MdDocs